Working as an HSE Engineer at Qadri Engineering (Pvt.) Limited (QEN) located at 37Km Multan Road Lahore which is a sister company of Qadri Group of Companies.
Key Roles and Responsibilities Were;

Support the implementation/Development and operation of the Integrated Management System (IMS) on the basis of ISO 14001 & 45001 in the organization
To drive Continuous improvement initiatives and monitor new initiatives on continual improvement
To Develop HSE Plans that comply with company policies and procedures as well as local communities requirements
Ensure incident reporting, investigations and controls system in place and working efficiently
Ensure legal and regulatory requirements are well understood and implemented and record of compliance are maintained
Ensure HSE work instructions are developed, understood and displayed at respective areas
To suggest appropriate Hazard control techniques ( Elimination, Substitution, Engineering controls, Administrative controls and PPEs) in respective areas/ sections / machinery
Development and implementation of appropriate emergency response system (ERP)
To attend pre-job, planning and other contractor meetings (in case of civil works) as required
Ensure HSE notice boards & pictures are updated regularly to help creating safety culture within the organization
To Ensure that mitigation measures are being implemented to control adverse effects on environment due to the project works as per Environmental Management Plan (EMP) provided by the client/proponent of the project  
Ensure Monitoring & testing of environmental parameters ( noise, Lux, Water and emissions etc.) in-house / third party and records are maintained
To participate in the preparation and performing of HSE internal audit
Monitor progress on preventive and corrective actions related to HSE
Conduct HSE inspections / audits / self-assessments on daily basis
To conduct HSE presentations and training to employees as required
Deliver awareness sessions / emails / workshops / conferences on daily basis
Follow-up of fulfillment of training requirements for IMS in the organization
Keep the record of trainings, internal audits and MRM for evidence and audit purposes
Work towards the management vision of zero incident/accident at work site

Worked as HSE Supervisor/Environmental Coordinator at PARCO on the Project of PARCO TA-04 & Revamp with Descon.
Key Roles and Responsibilities Were;

Implementation & Monitoring HSE Policy at all project sites to determine the state of compliance while carrying out different activities to avoid accident/incident
Propose appropriate solutions in accordance with applicable legislation and corporate HSE policies
Ensure that contractors and site visitors receive HSE induction training
Ensure the implementation of all HSE standards and company HSE policies at site
Provide support and direction to other plant functions and coordinate with auditors during on-site compliance audits
Conducting Task specific Safety Meetings for high risk activities
Conducting risk assessments and take follow-up for implementation of improvement actions to reduce the residual risk level
Assist with the implementation of JSA and inspect job site activities during particularly difficult or hazardous work situations
Supervision of confined space entry and hard job tasks
Coordinate and participate in the investigation of accidents and near misses.
Ensure regular emergency response exercises and drills are conducted to ensure the highest level of preparedness in any emergency. Maintains records of such drills, providing recommendations for emergency response improvements
Assess and comply with company training programs including Behavior Based Safety program, SSoW, Ergonomics, Permit to Work system, LOTO system
Monitor the implementation of ‘‘Permit to Work” System
Mode ZERO assessment for machinery safety and trainings of employees (Mgmt. & Non-Mgmt.) to comply with requirements of machinery safety
Ensure the provision of PPEs like breathing apparatus, high visibility jackets, hard hats, goggles, safety shoes, ear plugs/muffs for workers safety at work
Ensure the implementation of environmental management plan (EMP) which is a part of approved EIA of the project by Punjab-EPA
Ensured that mitigation measures are being implemented to control adverse effects on environment due to the project works as per Environmental Management Plan (EMP) provided by the client/proponent of the project
Defining Precautionary measures as per Material Safety Data Sheet (MSDS) before handling of Hazardous material/waste
Ensure the testing for Vehicular Emissions for the vehicles operating at project site and their compliance with NEQs/PEQs
To manage the integrated waste including hazardous, non-hazardous, pyrophoric from Project activities and ensure compliance of all HSE standards during particular waste handling to eliminate the possible potential risks to humans and environment
Preparation and submission of environmental compliance reports to EPA-Punjab on quarterly basis as per EMP of project

Stationed at KKH Phase-II (Havellian-Thakot) Highway Project Hazara Motorway) of China Pakistan Economic Corridor (CPEC) With China Communications Construction Company Limited (CCCCL)).
Key Roles and Responsibilities Were;

Implementation & Monitoring HSE Policy at all project sites to determine the state of compliance while carrying out different activities to avoid accident/incident
Propose appropriate solutions in accordance with applicable legislation and corporate policies
Ensure the implementation of all HSE standards
Assist in developing and implementing field location based emergency response procedures and evacuation plans
Mode ZERO assessment for machinery safety and trainings of employees (Mgmt. & Non-Mgmt.) to comply with requirements of machinery safety
Assess and comply with company training programs including Behavior Based Safety program, SSoW, Ergonomics, Permit to Work system, LOTO system
Monitor the implementation of ‘‘Permit to Work” System
Inspection o scaffolding erected for work at heights for different work sites
Ensure that contractors and site visitors receive HSE induction training
To manage the integrated waste including (hazardous, non-hazardous) from all Project sites and ensure compliance of all HSE standards during particular waste handling to eliminate the possible potential risks
Defining Precautionary measures as per MSDS before handling of Hazardous material/waste
Ensuring proper application of job specific PPEs for workers at project sites.
Conducting monthly HSE meetings to coordinate and communicate with contractor on critical HSE issues of the project
Responsible to prepare weekly and monthly HSE reports and statistics related to HSE performance
Studied the approved Environmental Impact Assessment (EIA) of the project including Environmental management plan (EMP)
Ensure the implementation of environmental management plan (EMP) which is a part of approved EIA of the project by Pak-EPA
Ensure that testing of environmental quality parameters (Air, water, soil and noise) is done and it is in compliance with National Environmental Quality Standards (NEQs)
Inspected and ensured that mitigation measures are being implemented to control adverse effects on environment due to the project works as per Environmental Management Plan (EMP) provided by the consultant

Acted as Environmental Engineer for EIA/IEE projects, Env. designs etc. and Coordination with EPD Punjab.
Key Roles and Responsibilities Were;

Collection of the ground data related to physical, biological, social and socio-economic environment by surveying the project area
Scrutinizing of data for preparation of baseline environmental profile of project area
Identification, prediction and evaluation of the possible environmental impacts of the proposed project on its immediate surroundings on both short and long-term basis
Preparation of the EIA and IEE reports of the projects which is to be presented in EPA-Punjab to obtain NOCs for the projects
Monitoring of construction of the projects to ensure the implementation of mitigation measures
Ensured the conservation of water during construction phases of the projects
Different office management tasks assigned by the firm while working in ESCS
Follow-up in EPA-Punjab regarding about queries and replies for different projects

Worked as Safety Engineer for the Project tile of Safety Audit of Nestle Pakistan (Pvt.) Ltd Kabirwala Factory for Noise, Lux and Humidity.
Key Roles and Responsibilities Were;

Monitoring of Noise, Lux and Humidity within the factory premises
Conducted a survey to check the compliance of Noise, Lux and Humidity according to standards and prepared a report containing actual findings and plans to fill the gaps and submitted to factory administration for its implication
Attained trainings including induction training, visitor training, emergency response training, permit to work training and participated safety drills.
Supervised the implementation of Permit to Work (PTW) and Standard Operating Procedures (SOPs) within the factory premises
Analyzed the Activated Sludge Process (ASP) for wastewater Treatment and Reverse Osmosis for water treatment
Assessed the performance of Incinerator for Solid waste incineration

Worked as a Safety Inspector at Environmental Protection Department (EPD) of Punjab for Lahore city.
Key Roles and Responsibilities Were;

Exercised Law Enforcement and SIR (Site Inspection Report) preparation
Worked on the data management at Complaint Management System (CMS)
Office managements tasks assigned by supervisor
Studied the Pakistan Environmental Protection Act (PEPA) 1997 amended in 2012