 Worked as Commissioning & Maintenance Support Engineer in Qatar Energy annual Maintenance carried out by Descon Engineering Qatar L.L.C.
 Performed preventive/corrective maintenance, FIN minor maintenance and troubleshooting of UPS systems, Rotating equipment, Battery chargers, MCCB, SMDB, Lead-Acid Batteries, HVAC, PACU & ACCU, MOV, Direct Current Ground Detector, Motor Control Centers, AC Motors, DC Motors, Heat Tracing System, Hoists and cranes, Fire Detection System Alarm Circuit, Electrical Heaters and Installation of Grounding Trucks.
 Supported commissioning tests (FAT, G-CAT, S-CAT, Pre-Op, Flushing, CHT and HFT), AR (Action Request), JHA (Job Hazard Analysis), WO (Work Order) and approval from Qatar energy for a PTW.
 Performed commissioning & maintenance activities for 13.8 kV and 4.16 kV Switchgears, 480 V Load Centers and MCCs including the 120 V as well as 240 V local distribution panels.
 After clarifying from the drawings like P&ID, CLD (Control Logic Diagrams) and Electric schematic diagrams made sure in advance that the clearances (Blockings) were approved from the WEC (Work Execution Center) and the equipment was isolated with appropriate tags and locks on the equipment.
 Performed inspections, repairs, maintenance, modifications and ECTR of electrical equipment as per the work orders.
 Carried out system line-ups, JHA, PTW and SWR as per the work orders by Qatar Energy.
 Inspected and resolved the root cause of ARs generated for electrical systems.
 Acted as a coordinator between Qatar Energy and Descon Electrical Teams by keeping up with the electrical work schedules for crude Area and RFCC area.
 Made sure that the work orders were executed as per the schedule in different test phases, in sequence and in a timely manner after discussing the jobs with the work related teams. (i.e. Electrical, Mechanical, I&C and/or MMIS)
 Removed the locks and tags after an activity was completed upon approval from the shift supervisor in the MCR (Main Control Room).
 Supported Auxiliary Boiler operation.
 Supervised diesel refueling activities of Auxiliary Boiler and Emergency Diesel Generator as well as CO2, H2 and N2 for related systems.
 Supervised and directed rigging and scaffolding activities.
 Carried out support in electrical equipment mobilization activities.
 Conducted Crude Area plant turn over self, pre and final walk-downs.
 Cleared punch items generated by Qatar Energy oversight engineer during the walk-downs of the primary and secondary systems.

Working as a C&I Engineer in operations & maintenance of 2.82MW pakpattan hydro power plant, pakpattan.
• Responsible for the maintenance work of electrical components of the projects, fault diagnose, troubleshoot, timely repair and overhauling of electrical components.
• Monitoring the auxiliary Systems, Power Line Carrier, LT (415V) & HT (11KV) Switchgear, Air Brake System, Air Compressor System, Fire Fighting System, Cooling Water Systems.
• Responsible for smooth operation of plant with timely maintenance of all Protection, Control and Instrumentation equipment, sensors, RTDs, PLCs, SCADA system.
• Troubleshooting of plant tripping, faults and alarms.
• Calibration, Installation and Commissioning of all types of field instruments.
• Liaison with Chinese manufacturer though office correspondences email/phone.
• Responsible to maintain record of all the C&I related maintenance activities
• Coordination with operation team for ensuring safe working of machine.
• Preparation of daily, monthly, and annual maintenance check sheets
• Preventive maintenance of all machines, which include daily, weekly, and annual Maintenance.
• Preparation of monthly progress report of plant.
• Troubleshooting of PCS protections relays, local control panels PLC program downloading and uploading and redesigning on need.
• Troubleshooting of Siemens PLC S7-200& S7-300, DELTA, Mitsubishi and also HMI’S.
• Hands on experience of troubleshooting faults in MICRO processor based hydraulic Governor System.
• Pressure transmitting transducers faults rectification.
• Proximity sensors and temperature measuring sensors fault rectification.
• Frequency measuring module complete installations and fault rectification.
• Fault rectification of analog to digital convertors.
• Motorized valves fault rectification and communications issues.
• operation, supervision and controlling of whole power house equipment through SCADA
• Hands on experience of maintenance management system, like maintaining station logs preparing trouble reports, issuing sp tags, requesting and issuing PTW as per safety policy of the company.
• Experience of working with minimal supervision or as a Part of a small team in analyzing and troubleshooting electrical equipments.
• Carry out remedial measures and perform analysis in case of any outage in the live network.

Worked as JR.I&C Engineer (SCADA)  in operations & maintenance of 7.64MW Hydro power plant Head Marala Sialkot.

Maintenance of motors ac/dc , installation of main drives ,vfd , hvc maintenance was part of the job